Snorkels vary in INLET SIZE. PLEASE MEASURE YOUR SNORKEL HEAD INLET OUTER DIAMETER. Use the drop-down menu to pick which inlet size adapter is right for you.
This Snorkel Upgrade is the Sy-Klone Series 9001. Which has a CFM efficiency range of 100 CFM to 275 CFM. This is for Gas Engines up to 4.8 liters displacement size.
Ships on average in less than 72 business hours.
It's great for Tacomas, 4Runners, Jeeps, Honda CRVs, Lexus GX's, and just about anything with a snorkel on it under 4.8 liters in engine size.
Email Isaac@snorkelupgrade.com with any questions!
Want to see the Snorkel Upgrade precleaner in action? Check out some of the accounts of the rigs shown above and more on Instagram
@dan_beardly Jeep Renegade
@overland_bute Jeep Renegade
@wanderingrubicon_overland Toyota 4runner
@greatestofalltexas FJ Cruiser
@bound_4_freedom Lexus GX470
@subaru_rob Subaru Forester
Not all engines are the same and you want to make sure your Precleaner fits your engine like Cinderella's slipper, perfect... or should we say your Cylinderella.
We have run the numbers on CFM consumptions across all types of engines. In fact, it is the science we pride ourselves in. Decades of field testing forged the range of different Series 9000 Precleaners and adaptations to perfectly match the environment and CFM requirements of each engine to maximize particle separation. It's the Spin-Science applied across the design of the Dome and rotor that makes The Sy-Klone Series 9000 the market-leading engine Precleaner*! (or PreFilter*.. potato-potato? ;-p depending on how you want to say it. )
Adapters are either included in the price of the item or can be purchased separately.
Want to talk about your rig, share some content with us, or learn more about your CFM consumption?
The snorkel pre-cleaner is a patented technology that uses the centrifugal force generated by the rotor inside of its dome to separate particles out of the air before going into your snorkel.
The pre-cleaner uses the airflow from your engine intake to spin a rotor which creates a cyclone style effect inside the dome pushing large particles to the inner wall of the dome where they are ejected. This makes the worries of rain, snow or lots of dusty on a dry day from coming into your snorkel and clogging your filter go away! With this pre-cleaner, you also don’t need to worry about adjusting your snorkel head or dumping out a pre-cleaner that catches debris.
- The Product Series 9000® created by Sy-Klone®
- Patented US-made technology
- Used across all major heavy equipment manufacturers for decades
- Standard issue on the military Humvee replacement the JLTV
- Product compatibility
- The diameters of snorkel inlets normally range from 3 to 4 inches.
- Fits most if not all snorkel kits on the market including, AEV, RuggedRidge, Bravo, Safari, and more.
- How to install
- Remove the current head from your snorkel.
- Measure the inlet after the snorkel head is removed (most cases your inlet will be 2 ½ inches, 3, inches or 4 inches).
- Put your old snorkel head back on for the time being.
- Order your pre-cleaner snorkel upgrade.
- Once you have your pre-cleaner remove your old snorkel head.
- Insert rubber adapter.
- Place pre-cleaner on the inlet of your snorkel.
- Tighten down the metal clamp.
- Go out on your next off-road adventure knowing you don’t need to worry about rain, heavy dust, snow, and other debris you might find yourself in.
Sy-Klone®, Series 9000® are registered trademarks of Sy-Klone International. Copyright © 2019 Sy-Klone International.
The Snorkely upgrade pretty much saved me from ever having to change an engine air filter again! The first time I drove cross country through deserts and offroad my air filter was choked and cooked in 2 months' time (15,000 miles). The second time I had upgraded my snorkel head and my airbox was COMPLETELY clean. The amount of debris your snorkel intakes is no joke, combined with rain, snow, dust it can ruin your air filter in days if not weeks.
This upgrade ir something anyone who goes out and uses their vehicle often should consider and for those of you that don't consider doing it to prevent any water from ever entering your airbox!
Been using for the last couple thousand miles and it works as advertised. I did notice a small power loss which is to be expected but it definitely keeps junk out of the intake compared to a standard snorkel head. Trimmed my ARB snorkel body down about 1.5” so the pre-filter would sit where the original head was intended to sit. Does look different so for fun I call it my rice cooker. Worth the price and a good upgrade, would recommend.
From start to finish my experience with snorkel upgrade has been amazing. All my pre-purchase questions were answered same day within just hours of reaching out, and product was received within 10 days ordering. As for performance and functionality of the Snorkel upgrade… WOW! Living in AZ dust the main killer, and the reason I decided to pick up the snorkel upgrade. My K&N filter looks fresh like I just dropped it in after 3k miles! Thanks for making a top quality product, that truly works!
Once I put this upgrade on, I felt indestructible. Following a line of trucks on a dusty road and you’re in the back? No problem. Kicking up mud into your fender liners where the old intake was? No problem. Driving through a bug storm? No problem. This filter gives you the peace of mind every outdoor enthusiast deserves. 10/10.
Recently purchased this for a Mojave Road trip, thank God I did… the dust was out of control! Luckily when I got home, I cracked open the air box to see what I picked up, surprisingly, it was really clean! Love it!